NASDAQ: LHSWShenzhen Sowell Technology Development Co., Ltd.

SOWELL Precision Vision AI Painting Robot9-axis · 3D vision · 360° automated car painting

The SOWELL Precision Vision AI Painting Robot (also called the nine-axis linked painting robot) is an automotive spray painting system by Nasdaq-listed Sowell Technology (LHSW). It 3D-scans and models each vehicle on the fly — no vehicle database required — then plans trajectories and paints full-body A-surfaces, multiple parts in sequence or individual components with ±0.1 mm repeatability. Compatible with standard paint booths.

  • 9Degrees of freedom
  • ±0.1 mmRepeatability
  • 360°Adaptive coverage
  • ≈18 moPayback period*
SOWELL AI painting robot 3D-scanning and spray painting a Tesla inside a paint booth No database needed · Any vehicle model

Old body-shop problems, solved by AI

Painting is one of the most skill-dependent steps in automotive repair.

  1. Painters are hard to hire

    Skilled painters take years to train and turnover is high, capping shop throughput.

  2. Quality depends on the hand

    Film thickness and uniformity vary by person, and rework wastes both paint and labour.

  3. High paint & labour costs

    Flow is controlled by feel, overspray is hard to measure, and wages keep rising.

  4. Health risks in paint mist

    Long hours in paint mist are tough on workers and make hiring even harder.

The SOWELL AI Painting Robot turns a master painter’s craft into a repeatable, measurable and continuously upgradable standard process.

VIDEO

See the AI robot paint a car

From 3D recognition and AI path planning to nine-axis spraying in one clip — plus real paint-booth footage of full-body and part painting.

SOWELL Precision Vision AI Painting Robot – demo3D vision recognition → AI path planning → fine atomised spray → 9-axis motion for any scenario
Real paint booth: full-body & part paintingThe AI precision painting robot painting a hood and a bumper inside a paint booth

ADVANTAGES

Five core advantages

01

3D vision, intelligent recognition

3D vision automatically identifies and precisely locates the areas to paint, plans optimised trajectories and works with the control system to standardise the process, adjusting spray parameters in real time for special conditions and varied requirements.

02

No database, any vehicle

The system models each object on the fly without a pre-stored vehicle database, generating a precise plan for any car — from luxury vehicles to micro EVs.

03

Lower cost, higher efficiency

A full closed-loop control architecture with intelligent trajectory planning and automatic gun control keeps coatings even and stable, removes manual process deviations, regulates flow precisely to reduce material loss, and supports all-day continuous operation.

04

Upgradable without limits

OTA updates and a modular architecture allow flexible expansion and fast reconfiguration; continuous learning from operating data keeps improving decision-making toward fully unmanned operation.

05

Fast return on investment

Official Sowell data cites a payback period of about 18 months, achieved through systematic cost restructuring and stable long-term operation that goes beyond the limits of manual work.

AI painting robot spraying a car body, half already painted blue

AI painting in progress: left side finished, right side still to be painted

HOW IT WORKS

How it works – four steps

  1. 1

    3D vision scan

    The vehicle or part enters the booth and the 3D vision system scans it, reconstructing a high-precision point cloud.

  2. 2

    AI modelling

    Machine-vision AI performs perception and pose estimation and identifies the areas to paint — no vehicle data needed.

  3. 3

    Automatic path planning

    A dynamic process model plans the spray trajectory and adjusts parameters based on real-time data.

  4. 4

    Nine-axis painting

    The gantry moves in 3D space together with the 6-axis arm and automatic gun for 360° adaptive painting without blind spots.

MODULES

Five functional modules

The system consists of the gantry, robot arm, main control cabinet, quick-change spray gun assembly and 3D vision recognition system, combining 3D vision and smart point clouds for unmanned high-precision painting.

Gantry

Gantry

Steel & aluminium-alloy frame that moves the arm in 3D space to cover the whole vehicle; fits standard or custom booths.

Robot arm

Robot arm

A 6-axis arm adjusts spray posture and works with the gantry for nine-axis motion over complex curves.

Main control cabinet

Main control cabinet

The control hub coordinating vision, trajectories and the spray gun, with OTA updates.

Quick-change spray gun

Quick-change spray gun

Automatic gun with precise flow control; quick-change design for colour changes and maintenance.

3D vision recognition system

3D vision recognition system

High-precision 3D scanning and point-cloud reconstruction to identify paint areas and part pose.

SPECIFICATIONS

Technical specifications

Precision Vision AI Painting Robot (nine-axis linked painting robot):

SOWELL Precision Vision AI Painting Robot specifications
Degrees of freedom9 (nine-axis linked)
Repeatability±0.1 mm
Curb weight3050 kg
Overall dimensions (L×W×H)6750 × 3850 × 2759 mm
Main materialsSteel & aluminium alloy
Rated power3750 W
Input power220 V 50 Hz
Clean, dry air8–10 bar
Protection ratingIP54
Ambient temperature-10 °C to 70 °C

* Specifications from the official Sowell website and brochure. Payback period is from official Sowell material; actual results depend on job volume, paint type and labour costs — contact us for an estimate.

SOWELL nine-axis painting robot: 6-axis arm with quick-change spray gun

APPLICATIONS

Applications

  • Collision repair centres

    High-volume body and paint work with a standardised process and consistent quality.

  • Dealership body shops

    More after-sales paint capacity and consistency despite painter shortages.

  • Chain repair & colour-change shops

    Full-body A-surface and multi-part painting for scalable, standardised operations.

  • Automotive parts painting

    Independent painting of removed parts such as bumpers and hoods.

  • Industrial components

    Already deployed for aerospace component coating; other parts can be evaluated.

  • Integrated paint booths

    Fits standard booths, integrates with new booth designs and can be customised to booth size.

CASES

Success stories

SOWELL AI painting robots are deployed in China, South Korea, South Africa, France and more.

  • South Korea painting robot project

    South Korea painting robot project

    An “AI Intelligent Painting Robot” booth in service at a Korean car service centre.

  • BYD painting robot project

    BYD painting robot project

    Automated painting of a new-energy vehicle body.

  • Aerospace components coating

    Aerospace components coating

    Vision recognition and automated spraying extended to industrial parts.

  • Sino-French strategic cooperation

    Sino-French strategic cooperation

    Sowell and AUTOMATON SAS (France) signed a strategic agreement on intelligent spray painting robots.

  • Zhongtai Yunbao painting robot project

    Zhongtai Yunbao painting robot project

    Nine-axis painting system installed in a large paint booth.

  • South Africa painting robot project

    South Africa painting robot project

    Robot painting vehicle body parts.

INDUSTRY

Industry footage: spray-on wrap & colour-change shops

Spray processes are spreading across the automotive aftermarket. Demand for spray-on protective wraps and colour changes is growing fast, raising the bar for painting capacity and consistency. Below is footage from shops in Dongguan, Shenzhen, Panyu, Lanzhou and Nanjing.

Shenzhen shop · spray-on wrapLivery created by spraying (manual application)
Dongguan shop · spray-on wrapFull-body spraying without knife cutting (manual application)
Shenzhen shop · thickness checkMeasuring sprayed wrap thickness with a gauge (manual application)
Panyu shop · spray-on wrapFinished result and peel-off demo (manual application)
Lanzhou shop · colour-change wrapPorsche colour-change spray wrap result (manual application)
Nanjing shop · spray-on wrapSpray-wrap process inside a paint booth (manual application)

Note: these videos show manual spray-wrap application in shops to illustrate the process and results; they are not footage of the AI painting robot. Contact us to evaluate whether your materials and process suit robotic painting.

Worry-free after-sales service

Backed by a listed company, Sowell provides dependable technical support plus continuous hardware and software upgrades.

  • Technical support

    Support for installation, deployment and daily operation.

  • OTA upgrades

    Remote software updates keep painting capability improving.

  • Free training

    Operator training for quick, easy adoption.

  • 3-year warranty

    A three-year warranty for peace of mind.

ABOUT SOWELL

About Sowell Technology

Shenzhen Sowell Technology Development Co., Ltd. was founded in 2007 and is listed on Nasdaq (ticker LHSW) — the 217th listed company in Shenzhen’s Nanshan District. It develops and manufactures industrial machine vision, spray painting robots, AI and smart-healthcare products.

Building on its expertise in industrial vision and automation, Sowell works with the High-end Equipment Research Institute of Zhejiang University, combining high-precision point-cloud reconstruction with dynamic process-model algorithms to create an automotive aftermarket painting solution that keeps evolving.

Sowell was named a Shenzhen-Hong Kong-Macao Top 100 Innovative Sci-Tech Enterprise in 2022, a Shenzhen Specialized and New SME in 2023, and a national-level “Specialized and New Little Giant” in 2025.

  • 2007Founded
  • LHSWNasdaq ticker
  • 47Patents
  • 56Software copyrights
  • 7Test reports
Invention patent
Invention patent
Software copyright
Software copyright
Honour certificate
Honour certificate
High-tech enterprise
High-tech enterprise
Innovative SME
Innovative SME
System certification
System certification

FAQ

Frequently asked questions

What is the Precision Vision AI Painting Robot?

The Precision Vision AI Painting Robot (also called the nine-axis linked painting robot) is an automotive spray painting system developed by Shenzhen Sowell Technology Development Co., Ltd. (Nasdaq: LHSW). Using high-precision machine-vision AI for perception and pose estimation, a gantry moving in 3D space works with a 6-axis arm to paint vehicles 360° without blind spots. It supports full-body A-surface painting, multi-part continuous painting and individual painting of removed parts.

Why is it called a nine-axis painting robot?

It has nine degrees of freedom: the gantry moves the arm in three-dimensional space while the 6-axis arm adjusts posture, so the spray gun can reach every curve of the body at the right angle.

Does it need a vehicle model database?

No. The robot 3D-scans and models each object in real time, so it can generate a precise painting plan for any vehicle — from luxury cars to micro EVs — without pre-stored model data.

How precise is it and what is the finish quality?

Repeatability is ±0.1 mm. Closed-loop control, intelligent trajectory planning and an automatic gun that regulates flow keep coatings even and stable while reducing manual deviations and material waste.

What can it paint?

Full-body A-surfaces, multiple parts in sequence and removed parts such as bumpers and hoods. Sowell has also delivered an aerospace component coating project; other parts can be evaluated.

What are the booth and installation requirements?

It fits standard paint booths, integrates with new booth designs and can be customised. Key data: 6750×3850×2759 mm, 3050 kg, 220 V 50 Hz, 3750 W rated power, 8–10 bar clean dry air, IP54, -10 °C to 70 °C.

How long is the payback period?

Official Sowell material cites roughly 18 months. Actual payback depends on monthly job volume, paint type and local labour cost — email cnsoftwell@tinker-ai.com for an estimate.

Will the equipment become outdated?

It supports OTA updates and a modular architecture, learns continuously from operating data, and Sowell provides ongoing hardware and software upgrades.

What after-sales service is included?

Technical support, OTA upgrades, free training and a three-year warranty.

How do I get a quote or book a demo?

Email cnsoftwell@tinker-ai.com with your company, city, booth size and monthly painting volume, or use the form at the bottom of this page. We will reply with a proposal, quote and demo options.

CONTACT

Get a free painting automation proposal

Tell us about your shop or factory. We will assess fit, estimate payback and arrange a demo.

  • Fit assessment: booth size, part types, capacity
  • Payback estimate based on your volume and labour cost
  • Quote: configuration, installation and service

Email: cnsoftwell@tinker-ai.com

Send an enquiry

Submitting opens your email app with the details filled in. If nothing opens, email cnsoftwell@tinker-ai.com directly.

Request a quote